DAY TO NIGHT MADE EASY 
By Gimp Master

This guide is for all people who are new to RM2K or can’t get
 the other day to night guides to work.
As I can’t get any Day/Night system to work I decided to use my
 brain/sawdust to try and think of a way to get this thing to 
work. Afther I did I though I’m can be the only one who is 
have trouble with it so I made this guide for you people.

DAY

In common events name one of the events Day make the event 
start condtion parallel process and appear in event day. 
Then make the events commands wait 0.1s and a variable that 
is called day (again) and make it + 1 do this by click on 
the + sign and make the set 1. Then make a fork condition 
then make it set as variable Day then at the set button 
set it to 7000 and make it above. Next set the screen tone
 as R070, G090, B070, S090 (Or whatever you want) you make
 a message here if you want but only if you want. 
Now go to change variable and set day to 0 then turn day 
switch off and evening switch on. Ok if you didn’t get
 that this is what the screen should look like:

<>Variable Op: [0001: Day] + , 1
<>Fork Optn: [0001: Day]-7000over
 <>Set screen tone: (R070, G090, B070, S090),1.0sec(W)
 <>Variable Op: [0001: Day] Set, 0
 <>Change switch [0019: Day] off
 <>Change switch [0020: Evening] on
 <>
: Excepting Case
<>
: End Case

EVENING

Now start on another event still in common events and make 
it a parallel process again and make work in event evening 
now copy the stuff from the last page and paste it on to 
this page. Now change the first variable event to evening 
variable but still doing the same thing. The screen tone 
to R000,G050,B070,S080. The next variable op change that 
to the evening variable and still do it the same thing. 
Now change the first switch to evening off and the second 
one to night on. Once again this is what it should look like:

<>Variable Op: [0002: Evening] + , 1
<>Fork Optn: [0002: Evening]-2466over
 <>Set screen tone: (R000, G050, B070, S080),1.0sec(W)
 <>Variable Op: [0002: Evening] Set, 0
 <>Change switch [0020: Evening] off
 <>Change switch [0021: night] on
 <>
: Excepting Case
<>
: End Case

NIGHT

There ain’t much point to explain like above so I’ll just 
show what is should look like. Remember to set in a 
parallel process and in switch night

<>Variable Op: [0003; Night] + , 1
<>Fork Optn: [0003: Night]-2466over
 <>Set screen tone: (R070, G080, B080, S090),1.0sec(W)
 <>Variable Op: [0003: Night] Set, 0
 <>Change switch [0021: Night] off
 <>Change switch [0022: morning] on
 <>
: Excepting Case
<>
: End Case

 MORNING

You now should know what your doing with the events but 
this is what it should look like

<>Variable Op: [0004: Morning] + , 1
<>Fork Optn: [0004: Morning]-2466over
 <>Set screen tone: (R000, G050, B070, S080),1.0sec(W)
 <>Variable Op: [0004: Morning] Set, 0
 <>Change switch [0023: Morning] off
 <>Change switch [0020: Day] on
 <>
: Excepting Case
<>
: End Case

There you have it all you have to do is in your opening event 
put the switch Day on or what time you want your game to start. 
If you do use this system please state so in your credits and 
send me a copy of the game as I would like to see how other 
people game turn out with this system anyway good luck with 
your game. Send them or if your having probs send to 
gimpinmaster@hotmail.com ,Gimp Master